D2006

Face Only Thickness: 3.7-4.1mil

Adhesive Thickness: 1.6mil

Type of film: High-grade polymeric vinyl plastic release liner film

Adhesive: Henkel solvent-based acrylic adhesive

PVC Face Film:90mic

Release liner: Plastic liner, PET, 75mic

Heat Temperature:-30 to +140 degrees

Storing period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place.

Indoor life: 4 years.

Outdoor life: 3 years.

Certification: ISO9001

Dimensional stability: shrinkage of less than 2%

Chemical Resistance: Resists Most Mild Acids, Mild Alkalis, and Salt

Application: from +16°С to +23°С, usage from -30°С to +50°С

Tools: Standard squeegee with a soft buffer

Conformability: Flat, simple, and moderate compound curves, convex and concave surfaces

Applications: Full Vehicle Wraps & Graphics, Architectural Signage, Buses, Cars, Trucks & Vans, Mirrors, Bumpers, Hoods, Roofs, Door handles, Vehicle lettering, Interior trim, Watercraft, Decals & Stripes, Accents & Trim, Dash panels, Electronics, Skins & More.

D0904

Face Only Thickness: 3.7-4.1mil

Adhesive Thickness: 1.6mil

Type of film: High-grade polymeric vinyl plastic release liner film

Adhesive: Henkel solvent-based acrylic adhesive

PVC Face Film:90mic

Release liner: Plastic liner, PET, 75mic

Heat Temperature:-30 to +140 degrees

Storing period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place.

Indoor life: 4 years.

Outdoor life: 3 years.

Certification: ISO9001

Dimensional stability: shrinkage of less than 2%

Chemical Resistance: Resists Most Mild Acids, Mild Alkalis, and Salt

Application: from +16°С to +23°С, usage from -30°С to +50°С

Tools: Standard squeegee with a soft buffer

Conformability: Flat, simple, and moderate compound curves, convex and concave surfaces

Applications: Full Vehicle Wraps & Graphics, Architectural Signage, Buses, Cars, Trucks & Vans, Mirrors, Bumpers, Hoods, Roofs, Door handles, Vehicle lettering, Interior trim, Watercraft, Decals & Stripes, Accents & Trim, Dash panels, Electronics, Skins & More.

D0906B

Face Only Thickness: 3.7-4.1mil

Adhesive Thickness: 1.6mil

Type of film: High-grade polymeric vinyl plastic release liner film

Adhesive: Henkel solvent-based acrylic adhesive

PVC Face Film:90mic

Release liner: Plastic liner, PET, 75mic

Heat Temperature:-30 to +140 degrees

Storing period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place.

Indoor life: 4 years.

Outdoor life: 3 years.

Certification: ISO9001

Dimensional stability: shrinkage of less than 2%

Chemical Resistance: Resists Most Mild Acids, Mild Alkalis, and Salt

Application: from +16°С to +23°С, usage from -30°С to +50°С

Tools: Standard squeegee with a soft buffer

Conformability: Flat, simple, and moderate compound curves, convex and concave surfaces

Applications: Full Vehicle Wraps & Graphics, Architectural Signage, Buses, Cars, Trucks & Vans, Mirrors, Bumpers, Hoods, Roofs, Door handles, Vehicle lettering, Interior trim, Watercraft, Decals & Stripes, Accents & Trim, Dash panels, Electronics, Skins & More.

Material: Self Healing Thermoplastic Polyurethane (TPU) made with 🇺🇸 Lubrizol brand TPU resins
Thickness: 7.5 mil or more (where options are available)
Roll size: 60 in x 50 ft(1.52 m x 15 m）
Compatible Post-Install Finishes: Ceramic, Polish, Wax, Quick Detailer
Liners: PET Release Liner on all finishes, PET cap sheet on glossy finishes
Adhesive: 🇺🇸 Ashland brand, Acrylic Pressure-Sensitive, Transparent
Removability: Removable with heat with minimal residue
Recommended Install Area Temperature: 70 F - 80 F (24 C - 26.5 C )
Storage: 2 Years from the Manufactured Date. Store in Range of 68F - 78F (20C - 26C) & Relative Humidity <50%
Chemical Resistance: Resists Most Mild Acids, Mild Alkalis and Salt
Application Method: Wet Application / Soapy Solution
Warranty Against Manufacturing Defects - 5 years
Application Surfaces: All Smooth Painted Surfaces, Stainless Steel, Compound Curves, Concave Surfaces, Flat Areas, Simple Curves (Do Not Apply to Textured Surfaces)

Material: Self Healing Thermoplastic Polyurethane (TPU) made with 🇺🇸 Lubrizol brand TPU resins
Application Method: Wet Application / Soapy Solution
Thickness: 7.5 mil or more (where options are available)
Roll size: 60 in x 50 ft(1.52 m x 15 m）
Compatible Post-Install Finishes: Ceramic, Polish, Wax, Quick Detailer
Liners: PET Release Liner on all finishes, PET cap sheet on glossy finishes
Adhesive: 🇺🇸 Ashland brand, Acrylic Pressure-Sensitive, Transparent
Removability: Removable with heat with minimal residue
Recommended Install Area Temperature: 70 F - 80 F (24 C - 26.5 C )
Storage: 2 Years from the Manufactured Date. Store in Range of 68F - 78F (20C - 26C) & Relative Humidity <50%
Chemical Resistance: Resists Most Mild Acids, Mild Alkalis and Salt
Warranty Against Manufacturing Defects - 5 years
Application Surfaces: All Smooth Painted Surfaces, Stainless Steel, Compound Curves, Concave Surfaces, Flat Areas, Simple Curves (Do Not Apply to Textured Surfaces)

Material: Self Healing Thermoplastic Polyurethane (TPU) made with 🇺🇸 Lubrizol brand TPU resins
Thickness: 7.5 mil or more (where options are available)
Roll size: 60 in x 50 ft(1.52 m x 15 m）
Compatible Post-Install Finishes: Ceramic, Polish, Wax, Quick Detailer
Liners: PET Release Liner on all finishes, PET cap sheet on glossy finishes
Adhesive: 🇺🇸 Ashland brand, Acrylic Pressure-Sensitive, Transparent
Removability: Removable with heat with minimal residue
Recommended Install Area Temperature: 70 F - 80 F (24 C - 26.5 C )
Storage: 2 Years from the Manufactured Date. Store in Range of 68F - 78F (20C - 26C) & Relative Humidity <50%
Chemical Resistance: Resists Most Mild Acids, Mild Alkalis and Salt
Application Method: Wet Application / Soapy Solution
Warranty Against Manufacturing Defects - 5 years
Application Surfaces: All Smooth Painted Surfaces, Stainless Steel, Compound Curves, Concave Surfaces, Flat Areas, Simple Curves (Do Not Apply to Textured Surfaces)

Material: Self Healing Thermoplastic Polyurethane (TPU) made with 🇺🇸 Lubrizol brand TPU resins
Thickness: 7.5 mil or more (where options are available)
Roll size: 60 in x 50 ft(1.52 m x 15 m）
Compatible Post-Install Finishes: Ceramic, Polish, Wax, Quick Detailer
Liners: PET Release Liner on all finishes, PET cap sheet on glossy finishes
Adhesive: 🇺🇸 Ashland brand, Acrylic Pressure-Sensitive, Transparent
Removability: Removable with heat with minimal residue
Recommended Install Area Temperature: 70 F - 80 F (24 C - 26.5 C )
Storage: 2 Years from the Manufactured Date. Store in Range of 68F - 78F (20C - 26C) & Relative Humidity <50%
Chemical Resistance: Resists Most Mild Acids, Mild Alkalis and Salt
Application Method: Wet Application / Soapy Solution
Warranty Against Manufacturing Defects - 5 years
Application Surfaces: All Smooth Painted Surfaces, Stainless Steel, Compound Curves, Concave Surfaces, Flat Areas, Simple Curves (Do Not Apply to Textured Surfaces)