Important Notice:
Information on physical property in this document are based upon tests we believe to be reliable. They are intended only as a source of information and are given without guarantee and do not constitute a warranty. Purchasers should independently determine, prior to use, the suitability of this material to their specific use. 

Installation Conditions & Guidelines
To ensure optimal performance and long-lasting protection, please follow the installation instructions and environmental conditions below:

Recommended Installation Environment:

Room Temperature: 25 ± 3°C
Humidity: 50 ± 5% RH
Cleanliness: Clean, dust-free environment with no visible airborne particles
Installation Instructions:

Inspect the installation area for any conditions that may negatively affect the process. Resolve any defects or issues before proceeding.
Thoroughly clean the vehicle's painted surface to remove contaminants such as mildew, oil, grease, stains, or other residues.
Cut the film to the appropriate size. Do not remove the protective liner until just before application.
Eliminate all bubbles, wrinkles, lifting edges, and other surface defects during installation.
If the installed film fails to meet the required standards, remove and replace it with a new piece.
Clean surrounding and adjacent surfaces to remove any excess installation solution.
For one week after installation, avoid washing the vehicle or exposing it to rain to allow the adhesive to fully bond with the paint surface for maximum adhesion.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.

Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.

CAUTION!

 1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping. 

 2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.