Measure the size of area, select and cut film in corresponding, size with extra 5 to 10 centimeter.

Peel off the back paper and paste film on the corresponding area, then drying the water when installing the film with air channel.Spray water on the car and film when installing the film without air channel.

Start to paste at the centre of the area, then paste in radial way and make sure there are no bubbles inside of the film,using the heat gun when paste the film on the edge and other area.

After installation, cut the corresponding area and repair the edge area, so as to get a perfect result.

After 12 hours of installation, check the whole car to find problem, and to solve it properly. Then put the car in a room for 36 hours to make sure the glue stick with the car surface stably.